2015 Honda CR-Z Remote Head Key FCC ID: MLBHLIK-1T

Some vehicles that use this remote are onboard programmable and some are not. Onboard programmable vehicles means you can program the vehicle to accept new remotes yourself without any special tools or knowledge. Free phone tech support is available if needed.

Remote For Honda:

FCC ID: MLBHLIK-1T

Replaces Part Numbers: 35118TE0A10, 35118TP6A20, 35118TP6A00, 35118TP6A10, 35118SZTA00, 35118T0AA00, 35111SWA306, 35118SZTA00, 35118TM8A00

Condition: Brand New Aftermarket (No Logo)

Brand: Avicero

Remote Procedure:

• For2012-2013 CR-V, 2011-2015 CR-Z, 2010-2012 Crosstour, 2009-2013 Fit:

Since your vehicle is not onboard programmable, you will need a dealer or automotive locksmith to program the vehicle to accept the replacement remote. Please use an automotive locksmith rather than the dealer. You are likely to get a better service for a more reasonable price. Locksmiths make their prices based on their local market as well as the cost of the equipment used for your programming. Locksmith equipment for vehicle programming is very expensive and most of the charge is to compensate them for their initial equipment investment. An automotive locksmith will program your new remotes or keys by hooking up an expensive scan tool to your vehicle?? computer and making the vehicle learn the new remotes or keys.

• For 2008-2012 Accord 2Dr, 2007-2011 CR-V, 2010-2014 Insight:

IMPORTANT: Entering the programming mode cancels all learned remote codes, so no previously programmed remotes will work. You must program all remotes, including existing ones now. Separate your ignition key from remotes on keychain.

1. Start with your key in your right hand and any remote in your left hand. Keep all additional remotes easily accessible to your left hand. Insert the key into the ignition.

2. Perform these steps within 5 seconds.
a. Turn the ignition to the ON position (where the instrument panel lights are turned on without starting the engine.)
b. Press the UNLOCK button on the remote and release.
c. Turn the ignition back to LOCK (the position where the key is inserted) and leave the key in the ignition.
d. Turn the ignition to the ON position (where the instrument panel lights are turned on without starting the engine.)
e. Press the UNLOCK button on the remote and release.
f. Turn the ignition back to LOCK (the position where the key is inserted) and leave the key in the ignition.
g. Turn the ignition to the ON position (where the instrument panel lights are turned on without starting the engine.)
h. Press the UNLOCK button on the remote and release.
i. Turn the ignition back to LOCK (the position where the key is inserted) and leave the key in the ignition.

3. Within 5 seconds turn the ignition to ON.
4. Press the UNLOCK button on the same remote and release. The power door locks will cycle to confirm the system is in programming mode.
5. Within 10 seconds press the UNLOCK button on the same remote again and release. The door locks will cycle to confirm that the system accepted this remote.
6. Repeat step 5 for second or third remotes.
7. Turn the key back to LOCK and remove from ignition to exit programming mode.

The following vehicles can use this remote when equipped with the factory keyless entry system:

Honda Accord (2008-2012), Honda Accord Crosstour (2010-2011) – EXL/EX-L, Honda Accord Crosstour (2010-2011) – EX, Honda Crosstour (2012) – EXL/EX-L, Honda Crosstour (2012) – EX, Honda CR-V (2007-2011), Honda CR-V (2012-2013), Honda CR-Z (2011-2015), Honda Fit (2009) – Sport, Honda Fit (2010-2013), Honda Insight (2010-2014).